A complete roof repair process involves inspecting the roof for damage, preparing a detailed estimate, preparing the work area by protecting surrounding property, and then executing the repairs by removing damaged materials and installing new ones. The final steps include testing the repair and monitoring the area afterwards to ensure the fix is successful.
1. Inspection and assessment
1. Inspection and assessment
- Thorough inspection: A professional will conduct a detailed inspection to identify and locate all visible and hidden damage, checking for missing or damaged shingles, leaks, flashing issues, and structural problems.
- Damage assessment: This step determines the full extent of the damage and the scope of work required.
- Detailed estimate: The contractor provides a detailed estimate that includes the scope of work, materials, and cost.
- Area preparation:
- Protect your home and landscaping by laying down tarps to catch debris.
- Ensure a safe work environment for both the crew and the homeowner.
- Remove damaged materials: Damaged shingles, underlayment, or flashing are carefully removed. For small holes in asphalt roofs, you can simply apply roofing cement and a patch.
- Install new materials:
- Replace damaged or missing shingles and flashing.
- Apply sealant for small cracks and holes.
- Ensure materials are properly aligned and secured to maintain a watertight seal and a clean appearance.
- Test the repair: After the repair is complete, test the area to ensure the leak is fixed. You can do this by flooding the area with water from a hose and checking for any leaks inside.
- Monitor the area: Regularly check the repaired area to identify any potential issues early and ensure the repair is holding up.